Home>>Products>>SUB-HEALTH DIAGNOSIS THERAPY DEVICE MB-8A

SUB-HEALTH DIAGNOSIS THERAPY DEVICE MB-8A

SUB-HEALTH DIAGNOSIS THERAPY DEVICE MB-8A
SUB-HEALTH DIAGNOSIS THERAPY DEVICE   MB-8A
 
Production Introduction
This product is developed based on the theory of Physics. Bionics, body inductive
resistance dectective theory, acupuncturology,  magnetotherapy resonance theory,
Chinese traditional medical science and modern micro electronic technology, together
with many experiences of clinical practice. It not only have the mode of five Chinese
Medical Function which is Hammering, Acupuncture, Cupping, Scraping, Massage etc.,
and the model of integrated prescription for blood pressure reduction, neck, waist and leg;
but also it has been granted with the function of heating with pads. The pads could produce
temperature by the degree of 45-55,which will make the treatment more effectively to
ease fatigue and cure peripheral nerve injury and paralysis.
 
Treatment Principle
The product composes electricity with five kinds of micro-current programme simulating
human body, which directly take effect on the Acu-point, and then to restrain sympathetic
nerve, enlarge blood vessel, stimulate blood circulation and strengthen the
phagocytosis effect of organism accroding to low frequency stimulating action formed
by the feeling of acupuncture, and finally to achieve the purpose of anti-infla-mmatory and
detumescence. Meanwhile. the stimulation of compound electricity with high energy
distribution could also excite the nerve over sized fibres, disturb the cortex to trigger
out the covering effect. and achieve the effect of abirritation ; In addition. the impulsive
current distributed according to certain regulation could activate the neuromuscular
to cause the contraction and dilatation of muscle and engender exercise effect.
 
Diagnosis Function (How to find the acu-point)
Inside all the IMng bodies, there is always certain special resistance and current.
According to the resistance theory far different parts of the body, different points or
diseased organs, using the intelligence of microcomputer CPU and the technology
of frequency conversion digital biologic wave to searching for the right point can
solve the problem for searching for acu-point and increase the accuracy. The effect
of treatment will also be obvious. When using the diagnosis fuction, you may analyze
your health condiction through the data displayed on the LCD, which can help to find
the disease as early as possible and prevent it to become worse. Latent disease will
be therefore prevented in advance.
 
Electric Acupuncture Function
Electric Acupuncture thearpy take physiological effect on the human body .This
function can cure the weak organs of human body through the electrical stimulation
to the acupuncture points. Specially for dealing with persistent symptoms refractory,
It will have be effective to choose the electric moxibustion fuction.
Electric Acupuncture Function
Electric Acupuncture thearpy take physiological effect on the human body .This
function can cure the weak organs of human body through the electrical stimulation
to the acupuncture points. Specially for dealing with persistent symptoms refractory,
It will have be effective to choose the electric moxibustion fuction.
 
Heating function
The pad release the farinfrared heating temperature on your body, resulting in a
constanttemperature of 45-55 degrees, effect on skin to eliminate sub-health
symptoms.The pad have red line,it can help you to release nitric oxide, and then relax
blood vessels to prevent the block-up of blood clots. With the pad infrared heating
function. the therapeutic effect can be reached in a short time, which could make
the patients feel very comforta ble.
 
Range of treatment
Suitable for various acute and chronic diseases, assistant treatment for arthritis,
periarthritis, muscle strain, and soreness of parts like neck, shoulder, lain, leg and
so on.
 
 
How to use thetherapeutic apparatus
 1.Connect to the power supply: Connect the adaptor to the apparatus
   Press the power on button for 3 seconds to turn it onSwitch to the therapeutic mode.
 2.Electrode pad preparation: Take off the protective tissue stick on the surface of the pad
   After usage, stick the pad onto the wire routing board.
 3.Place the electrode Pad. Use a wet cloth to clean the skin and wipe the oil and sweat
   stain away. Stick the pad onto the position of the body where needs treatment. Two
   pads should stick to the skin in the mean time, or it will nat work. Not need to put the
   pads on the svmmetrical position.
Instruction on how to choose the acu-point when treatment
When treatment, users are suggested to choose the suitable acu-point according to
the disease. You may also turn to some other medical books for how to choose acu-
points. Using the acu-point locating function to detect the points and find it correctly
could accelerate the treatment and cure the disease as early as possible.
The main acu-points should be used every time, while the match acu-points are used
when necessary.
Example of Use
Maintenance after usage
How to clean the electrode pads
After usage, D0 not wipe the adhesive surface with a tissue paper or a cloth  If a tissue
paper is adhered to the adhesive surface by accident, do not try to peel it off. Instead,
moisten the tissue paper with a small amount of water, and then it will came off easily.
Wash the Pad when the adhesive surface of Pad becomes very dirty and the Pad is
difficult to attach. The Pads should be washed after every thirty uses. Pads can be
washed approximately ten times. Do not store the Pad under high temperature, high
humidity, and direct sunshine. The adhesive surface may be damaged and the Pad
may last shorter. If the adhesive surface becomes sticky or the Pad peels off, leave
the Pad in the refrigerator (do not freeze) overnight. The adhesion may be restored.
Pads are consumables. Purchase the optional Pad when the adhesive surface is
damaged.
 
Correct Operation Instruction
1. Before using the treatment function, connect wire plug ofthe pads to the Electrode
    Outputjackofthedevice.
2. Adjust the intensity dial, increase gradually to the one which is suitable for yourself.
3. Press the mode selection button and choose the treatment mode.
4. Apply the electrode pads on part of your bodywhere weak organ locates or anywhere
    you want to massage.
5.Set the time how long the treatment is. When time is up, the device will turn off
automaticallv.
 
 Treatment Time
 1.2-3 times in one days. 5-10 minutes for every treatment. Every treatment should not
   last over 30 minutes.
 2.Different persons will have different feeling when facing the same stimulation. Some
   will feel the stim ulation is weak while others will feel it is strong. Stop using when your
skin turn red on the part where the pads stick on.
 3.After usage, turn off the power, or set the time and it will turn off automatically.